http://www.gadgetspeak.com/gadget/article.rhtm/753/592545/Dremel_Series_300_Multitool.html

Dremel Series 300 Multitool 

Image of author
A useful hobby and enthusiast tool that counts amongst it's abilities carving, engraving, sharpening, cleaning, cutting and sanding.

dremel series 300 multi tool drill sand grind polish
click image to enlarge

The Dremel Series 300 Multitool is very much like a small hand-held mains powered drill (in fact one of the jobs it can do is drill). The core unit takes a wide range of different tools, attachments and accessories. The review unit is packaged for Dremel's "Hobby" line and comes complete with twenty five different tools for a number of tasks.

The Dremel is provided in a soft blue zip-up case that also contains accessories, manual and a fold-out poster style guide to a wide, but not comprehensive, range of cutters, engravers, sanders and other miscellaneous tools. The manual includes a short section on safety and an introduction to the variaous elements of the tools itself.

One omission I think is the lack of a description of the accessories actually included with the product and from a hobbyist perspective any information on how those accessories should be used. The only information appears on the back of the packaging where each item is identified by part number. You are very much left to your own devices to realise that part '405' has to be used in conjunction with part 402. Through some detective work you can take these numbers and manually search for them in the accessories page of the Dremel web-site. Here's the list I put together:

  • 4 templates (three with shapes and one with letters)
  • a high speed cutter for hollowing or shaping soft materials
  • an aluminium oxide grinding stone. Used for sharpening, deburring and general purpose grinding of most materials
  • two polishing disks and a 'mandrel' (post to hold the disks)
  • a block of compound to be used with the polishing disks
  • five 'cut-off' wheels. These cut along the edge of a sharp disk used to cut or slot various materials
  • nine sanding disks. These are used with the same post as the cut-off wheels.
  • three sanding cylinders and a spindle
Pumpkin carving using a Dremel

Pumpkin Carving

It's almost Haloween and Dremel thought it would be a good idea to let you all know that you can use your Dremel to carve your very own pumpkin.

If you do give it a go then please let us know how you get on!

These should generally be considered very much as a sample of what's available and it's very unlikely what you'll find here will be a perfect match for your hobby. For any serious use you'll need to stock up on what you need. The sanding disks, for example, only seem to last a few minutes before needing to be replaced. Although the kit is provided with nine such disks they are in fact sold in packs of 36, indicating I think how many you're likely to get through.

The tool measures around 195x50x50mm (LxWxD) and weighs around 500g. It tapers toward the front and the intention is that you wield it somewhat like you would a heavy pencil. This does take some getting used to but you fairly quickly adapt. Controls are straightforward. Once you've fitted your chosen tool there's a single multi-position control that selects one of a number of speeds between 10,000 and 30,000 RPM.

The Dremel concept is very good and the range of accessories extensive. When configured for a particular use it's generally easy to operate. The excellent technology is let down a little by the lack of documentation. The manual itself should introduce the tools provided and should point the user to the Dremel web-site. The site does offer a number of useful resources including training videos, project notes and a fledgling community area where users can share their own project ideas. Currently this contains a handful of projects but could be extended further as could the community concept to provide discussion forums where users could ask for help and share ideas less formally. I've marked the Dremel lower than I would have liked for "Ease of Use" primarily because of difficulty in working out how to configure the tool for a specific purpose.

The Dremel Series 300 is a great craft tool with a wide range of attachments and accessories. The Hobby package I've reviewed here is available from Amazon for £40.49 including delivery (RRP £44.99). As mentioned the accessories included are however very limited and unlikely to be sufficient. I notice that you can get the Dremel with 30 tools for £35.99.

If you're buying this for yourself then I'd suggest spending some time on the Dremel site to decide what tools you need and buying those at the same time. If you're buying as a gift then I'd recommend adding a wider selection of tools. Dremel do have a 100 piece set for only £14.68

Follow us on Twitter!!

add to del.icio.us Digg this review
StumbleUpon
Reddit

Reviews by related category

What our readers said!

Rating:

Comment by CRIWBACH, 27 Oct 2009 18:50

BRILLIANT TOOL
Rating:

Comment by dowster1, 27 Oct 2009 6:45

Use 1 at work nice small compact piece of kit      
Rating:

Comment by AndyWarp, 6 Oct 2009 8:34

As always the total disregard for the end user(you and I) lets down an otherwise great product. The last time I bought a Dremmel kit it was a top of the range product in a case with what seemed to be a limitless suply of accesories but the documentation was almost non existant!
There is an asumption in some businesses suplying the hobby market that somehow we will muddle our way through and that this is a satisfactory state of affairs. The British electronics industry and many others were destroyed by management who were in fact the sales prevention officers.
Fortunately most of the specialist tool shops have sections devoted to dremmel accesories. The first new purchase should be a decent chuck as the strange device fitted is almost useless.

Comments are switched off for this article

Smiley Rating

Features2
Performance2
Value2
Ease of use2
Design2
OverallDremel Series 300 Multitool rated 80 out of 100

If you like this article then why not link to it from your site!

Use a text link, or download an image

 

Our current Free Prizedraw!!

Why join GadgetSpeak?

Well - there are lots of reasons to join, depending on you and your interests :

  • Member prize-draws
  • Real reviews - by real people
  • Membership is free
  • Email summary of the weeks reviews
  • Share your product feedback with others
  • Keep in touch with all that's new in gadgets
  • Full of great ideas as the Christmas deadline looms!

Convinced? Come along and join in the fun!

close

Invite friends and family to GadgetSpeak

Why not invite friends or family to join in the fun?

Help us make GadgetSpeak the place to come for free and impartial reviews of the latest gadgets!

Start inviting your friends along!